Starting up using a 2.0 ATA HBOT chamber, documenting the project step by step for publishing on biohacking project I am working on.
I want to find a reasonable:
- o2 sensor (that can go more than 30%)
- pressure sensor
- co2 sensor
The reason is that i don’t want to rely on the software of the hbot chamber to measure the o2 level, by itself, being a critical safety measure.
The chamber that don’t uses a BIBS mask breathing system, which input o2 and output co2 in different tubes, are more comfortable, but carry an extra risks because more o2 leaks into the chamber.
My hbot chamber measure if o2 level reach 35% and in such case activate an industrial chiller that change the air inside the chamber and bring back the normal oxygen level of 21% .
I do want to measure independently the o2 value %, to be visible enabling the uses to manually enact safety procedures (reduce oxygen level input, activate industrial chiller, starts de-pressure procedure to exit) if o2 level goes beyond safety level %.
Did anyone had experience with that independent hbot in-chambers parameters measurement?
Fabio https://hackingbiology.com
Ps @RapAdmin would be nice to have a tag for hbot in the forum